View ATF16LV8C-10JU_4283608.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Features
* 3.0V to 5.5V Operation * Industry-standard Architecture * * * * *
- Emulates Many 20-pin PALs(R) - Low-cost Easy-to-use Software Tools High-speed - 10 ns Maximum Pin-to-pin Delay Ultra-low Power - 5 A (Max) Pin-controlled Power-down Mode Option - Typical 100 nA Standby CMOS and TTL Compatible Inputs and Outputs - I/O Pin-keeper Circuits Advanced Flash Technology - Reprogrammable - 100% Tested High-reliability CMOS Process - 20 Year Data Retention - 100 Erase/Write Cycles - 2,000V ESD Protection - 200 mA Latchup Immunity Commercial and Industrial Temperature Ranges Dual-in-line and Surface Mount Packages in Standard Pinouts Inputs are 5V Tolerant Green Package Options (Pb/Halide-free/RoHS Compliant) Available
Highperformance EE PLD ATF16LV8C
* * * *
Description
The ATF16LV8C is a high-performance EECMOS programmable logic device that utilizes Atmel's proven electrically-erasable Flash memory technology. Speeds down to 10 ns and a 5 A pin-controlled power-down mode option are offered. All speed (continued)
Pin Configurations
All Pinouts Top View
Pin Name CLK I I/O OE VCC PD Function Clock Logic Inputs Bi-directional Buffers Output Enable (+3V to 5.5V) Supply Programmable Powerdown Option PLCC
I2 I1 I/CLK VCC I/O I/CLK I1 I2 PD/I3 I4 I5 I6 I7 I8 GND I/CLK I1 I2 PD/I3 I4 I5 I6 I7 I8 GND 1 2 3 4 5 6 7 8 9 10
TSSOP
20 19 18 17 16 15 14 13 12 11 VCC I/O I/O I/O I/O I/O I/O I/O I/O I9/OE
DIP/SOIC
1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 VCC I/O I/O I/O I/O I/O I/O I/O I/O I9/OE
3 2 1 20 19
I8 GND I9/OE I/O I/O
9 10 11 12 13
PD/I3 I4 I5 I6 I7
4 5 6 7 8
18 17 16 15 14
I/O I/O I/O I/O I/O
Rev. 0403H-06/06
1
ranges are specified over the full 3.0V to 5.25V range for industrial and commercial temperature ranges. The ATF16LV8C incorporates a superset of the generic architectures, which allows direct replacement of the 16R8 family and most 20-pin combinatorial PLDs. Eight outputs are each allocated eight product terms. Three different modes of operation, configured automatically with software, allow highly complex logic functions to be realized.
The ATF16LV8C can significantly reduce total system power, thereby enhancing system reliability and reducing power supply costs. When pin 4 is configured as the power-down control pin, supply current drops to less than 5 A whenever the pin is high. If the power-down feature isn't required for a particular application, pin 4 may be used as a logic input. Also, the pin keeper circuits eliminate the need for internal pull-up resistors along with their attendant power consumption.
Block Diagram
Note:
1. Includes optional PD control pin.
Absolute Maximum Ratings*
Temperature Under Bias.................................. -40C to +85C Storage Temperature ..................................... -65C to +150C Voltage on Any Pin with Respect to Ground .........................................-2.0V to +7.0V(1) Voltage on Input Pins with Respect to Ground During Programming.....................................-2.0V to +14.0V(1) Programming Voltage with Respect to Ground .......................................-2.0V to +14.0V(1) *NOTICE: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Note:
1. Minimum voltage is -0.6V DC, which may undershoot to -2.0V for pulses of less than 20 ns. Maximum output pin voltage is Vcc + 0.75V DC, which may overshoot to 7.0V for pulses of less than 20 ns.
DC and AC Operating Conditions
Commercial Operating Temperature (Ambient) VCC Power Supply 0C - 70C 3.0V to 5.5V
2
ATF16LV8C
ATF16LV8C
DC Characteristics
Symbol IIL IIH ICC1(1) IPD(1) IOS VIL VIH VOL VOH IOL IOH Note: Parameter Input or I/O Low Leakage Current Input or I/O High Leakage Current Power Supply Current Condition(2) 0 VIN VIL(Max) 1.8 VIN VCC 15 MHz, VCC = Max, VIN = 0, VCC, Outputs Open VCC = Max, VIN = 0, VCC VOUT = 0.5V; VCC= 3V; TA = 25C MIN < VCC < Max -0.5 2.0 VCC = Min; All Outputs IOL = 8 mA VCC = Min IOH = -4 mA VCC = Min VCC = Min 2.4 8 -4 Com. Ind. 0.1 Min Typ Max -10 10 55 60 5 -150 0.8 VCC + 1 0.5 Units A A mA
Power Supply Current, Power-down Mode Output Short Circuit Current Input Low Voltage Input High Voltage Output Low Voltage Output High Voltage Output Low Current Output High Current 1. All ICC parameters measured with outputs open.
A mA V V V V mA mA
2. For DC characteristics, the test condition of VCC = Max corresponds to 3.6V.
AC Waveforms(1)
Note:
1. Timing measurement reference is 1.5V. Input AC driving levels are 0.0V and 3.0V, unless otherwise specified.
3
AC Characteristics
-10 Symbol tPD tCF tCO tS tH tP tW Parameter Input or Feedback to Non-Registered Output Clock to Feedback Clock to Output Input or Feedback Setup Time Input Hold Time Clock Period Clock Width External Feedback 1/(tS+ tCO) fMAX Internal Feedback 1/(tS + tCF) No Feedback 1/(tP) tEA tER tPZX tPXZ Input to Output Enable -- Product Term Input to Output Disable -- Product Term OE pin to Output Enable OE pin to Output Disable 3 2 2 1.5 2 7 0 12 6 71.4 83.3 83.3 10 10 8 8 3 2 2 1.5 Min 1 Max 10 5 7 2 12 0 16 8 45.5 50 62.5 15 15 15 15 Min 1 -15 Max 15 8 10 Units ns ns ns ns ns ns ns MHz MHz MHz ns ns ns ns
Power-down AC Characteristics(1)(2)(3)
-10 Symbol tIVDH tGVDH tCVDH tDHIX tDHGX tDHCX tDLIV tDLGV tDLCV tDLOV Notes: Parameter Valid Input before PD High Valid OE before PD High Valid Clock before PD High Input Don't Care after PD High OE Don't Care after PD High Clock Don't Care after PD High PD Low to Valid Input PD Low to Valid OE PD Low to Valid Clock PD Low to Valid Output 1. Output data is latched and held. 2. High-Z outputs remain High-Z. 3. Clock and input transitions are ignored. Min 10 0 0 10 10 10 10 25 25 30 Max Min 15 0 0 15 15 15 15 30 30 35 -15 Max Units ns ns ns ns ns ns ns ns ns ns
4
ATF16LV8C
ATF16LV8C
Input Test Waveforms and Measurement Levels: Output Test Loads: Commercial
3.3V R1 = 316 OUTPUT PIN
tR, tF < 1.5ns (10% to 90%)
R2 = 348
CL = 35 pF
Note:
Similar devices are tested with slightly different loads. These load differences may affect output signals' delay and slew rate. Atmel devices are tested with sufficient margins to meet compatible devices.
Pin Capacitance
(f = 1 MHz, T = 25C)
(1)
Typ CIN COUT Note: 5 6 Max 8 8 Units pF pF Conditions VIN = 0V VOUT = 0V
1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested.
Power-up Reset
The ATF16LV8C's registers are designed to reset during power-up. At a point delayed slightly from VCC crossing VRST, all registers will be reset to the low state. As a result, the registered output state will always be high on power-up. This feature is critical for state machine initialization. However, due to the asynchronous nature of reset and the uncertainty of how V CC actually rises in the system, the following conditions are required: 1. The VCC rise must be monotonic from below 0.7V. 2. The signals from which the clock is derived must remain stable during TPR. 3. After TPR, all input and feedback setup times must be met before driving the clock term high.
Parameter TPR Description Power-up Reset Time Power-up Reset Voltage Typ 600 Max 1,000 Units ns
VRST
2.5
3.0
V
5
SUPPLY CURRENT
VS. INPUT FREQUENCY (VCC = 3.3V, TA = 25C)
40.0 39.5 39.0
60 50 40
OUTPUT SINK CURRENT
VS. OUTPUT VOLTAGE (VCC = 5V, TA = 25C)
ICC mA
IOL mA
30 20 10 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
38.5 38.0 37.5 37.0 10 20 30 40 50 60 70 80 90 100
OUTPUT VOLTAGE (V)
FREQUENCY (MHz) NORMALIZED SUPPLY CURRENT
VS. SUPPLY VOLTAGE (TA = 25C, STANDBY) 1.6 1.4 1.2
NORMALIZED SUPPLY CURRENT
VS. AMBIENT TEMPERATURE (VCC = 3.3V, STANDBY)
1.6 1.4 1.2
NORM ICC mA
1.0 0.8 0.6 0.4 0.2 0 -5 25 75
NORM ICC mA
1.0 0.8 0.6 0 3.0 3.3 3.6
AMBIENT TEMPERATURE (C)
SUPPLY VOLTAGE (V)
OUTPUT SINK CURRENT
VS. SUPPLY VOLTAGE (TA = 25C, VOL = 0.45V)
25.0 24.5 24.0 23.5 23.0 22.5 22.0 21.5 21.0 20.5 3.0 3.15 3.3 3.45 3.6
OUTPUT SOURCE CURRENT
VS. SUPPLY VOLTAGE (VOH = 2.4V, TA = 25C)
0 -2 -4 -6
IOL mA
IOH mA
-8 -10 -12 -14 -16 3.0 3.15 3.3 3.45 3.6
SUPPLY VOLTAGE (V)
SUPPLY VOLTAGE (V)
6
ATF16LV8C
ATF16LV8C
OUTPUT SOURCE CURRENT
VS. OUTPUT VOLTAGE (VCC = 5V, TA = 25C)
0 -5 -10
NORMALIZED tCO
VS. AMBIENT TEMPERATURE (VCC = 3.3V)
1.06 1.04 1.02 1.00 0.98 0.96 0.94 0.92 0.90 0.88 -5 25 75
IOH mA
-15 -20 -25 -30 0.5 1.0 1.5 2.0 2.5 3.0 3.3
NORM tCO
OUTPUT VOLTAGE (V)
AMBIENT TEMPERATURE (C)
NORMALIZED tPD
VS. SUPPLY VOLTAGE (TA = 25C)
1.2 1.0 0.8
NORMALIZED tS
VS. AMBIENT TEMPERATURE (VCC = 3.3V)
1.06 1.04 1.02 1.00
NORM tPD
0.6 0.4 0.2 0 3.0 3.25 3.6
NORM tS 0.98
0.96 0.94 0.92 -5 25 75
SUPPLY VOLTAGE (V)
AMBIENT TEMPERATURE (C)
NORMALIZED tPD
VS. AMBIENT TEMPERATURE (VCC = 3.3V)
NORMALIZED tH
VS. AMBIENT TEMPERATURE (VCC = 3.3V)
1.2 1.0 0.8
NORM tPD
1.06 1.04 1.02 1.00 0.98 0.96 0.94 0.92 0.90 -5 25 75
NORM tH
0.6 0.4 0.2 0 -5 25 75
AMBIENT TEMPERATURE (C)
AMBIENT TEMPERATURE (C)
7
NORMALIZED tCO
VS. SUPPLY VOLTAGE (TA = 25C)
1.2 1.0
0 -10 -20 -30 -40 -50 -60 -70 -80
0 -0.1
INPUT CLAMP CURRENT
VS. INPUT VOLTAGE (TA = 25C, VCC = 3.3V)
NORM tCO
0.8 0.6 0.4 0.2 0 3.0 3.25 3.6
INPUT CURRENT mA
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1.0
SUPPLY VOLTAGE (V)
INPUT VOLTAGE (V)
NORMALIZED tS
VS. SUPPLY VOLTAGE (TA = 25C)
1.2 1.0 0.8
35 30 25 20 15 10 5 0 -5 -10 -15 -20 0 0.5
INPUT CURRENT
VS. INPUT VOLTAGE (TA = 25C, VCC = 3.3V)
NORM tS
0.6 0.4 0.2 0 3.0 3.25 3.6
INPUT CURRENT mA
1.0
1.5
2.0
2.5
3.0 3.3
SUPPLY VOLTAGE (V)
INPUT VOLTAGE (V)
NORMALIZED tH
VS. SUPPLY VOLTAGE (TA = 25C)
1.2 1.0 0.8
NORM tH
0.6 0.4 0.2 0 3.0 3.25 3.6
SUPPLY VOLTAGE (V)
8
ATF16LV8C
ATF16LV8C
Ordering Information
tPD (ns) 10 tS (ns) 7 tCO (ns) 7 Ordering Code ATF16LV8C-10JC ATF16LV8C-10PC ATF16LV8C-10SC ATF16LV8C-10XC ATF16LV8C-15JC ATF16LV8C-15PC ATF16LV8C-15SC ATF16LV8C-15XC ATF16LV8C-10JI ATF16LV8C-10PI ATF16LV8C-10SI ATF16LV8C-10XI ATF16LV8C-15JI ATF16LV8C-15PI ATF16LV8C-15SI ATF16LV8C-15XI Package 20J 20P3 20S 20X 20J 20P3 20S 20X 20J 20P3 20S 20X 20J 20P3 20S 20X Operation Range Commercial (0C to 70C)
15
12
10
Commercial (0C to 70C)
10
7
7
Industrial (-40C to 85C)
15
12
10
Industrial (-40C to 85C)
Green Package Options (Pb/Halide-free/RoHS Compliant)
tPD (ns) 10 tS (ns) 7 tCO (ns) 7 Ordering Code ATF16LV8C-10JU ATF16LV8C-10SU ATF16LV8C-10XU Package 20J 20S 20X Operation Range Industrial (-40C to 85C)
Using "C" Product for Industrial
To use commercial product for industrial temperature ranges, simply de-rate ICC by 15% on the "C" device. No speed de-rating is necessary.
Package Type 20J 20P3 20S 20X 20-lead, Plastic J-leaded Chip Carrier (PLCC) 20-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP) 20-lead, 0.300" Wide, Plastic Gull-wing Small Outline (SOIC) 20-lead, 4.4 mm Wide, Plastic Thin Shrink Small Outline (TSSOP)
9
Packaging Information
20J - PLCC
1.14(0.045) X 45
PIN NO. 1 IDENTIFIER
1.14(0.045) X 45
0.318(0.0125) 0.191(0.0075)
e E1 B E B1 D2/E2
D1 D A
A2 A1
0.51(0.020)MAX 45 MAX (3X)
COMMON DIMENSIONS (Unit of Measure = mm) SYMBOL A A1 A2 D D1 E Notes: 1. This package conforms to JEDEC reference MS-018, Variation AA. 2. Dimensions D1 and E1 do not include mold protrusion. Allowable protrusion is .010"(0.254 mm) per side. Dimension D1 and E1 include mold mismatch and are measured at the extreme material condition at the upper or lower parting line. 3. Lead coplanarity is 0.004" (0.102 mm) maximum. E1 D2/E2 B B1 e MIN 4.191 2.286 0.508 9.779 8.890 9.779 8.890 7.366 0.660 0.330 NOM - - - - - - - - - - 1.270 TYP MAX 4.572 3.048 - 10.033 9.042 10.033 9.042 8.382 0.813 0.533 Note 2 Note 2 NOTE
10/04/01 2325 Orchard Parkway San Jose, CA 95131 TITLE 20J, 20-lead, Plastic J-leaded Chip Carrier (PLCC) DRAWING NO. 20J REV. B
R
10
ATF16LV8C
ATF16LV8C
20P3 - PDIP
D
PIN 1
E1
A
SEATING PLANE
L B1 e E B
A1
C eC eB
SYMBOL A A1 D E E1 B Notes: 1. This package conforms to JEDEC reference MS-001, Variation AD. 2. Dimensions D and E1 do not include mold Flash or Protrusion. Mold Flash or Protrusion shall not exceed 0.25 mm (0.010"). B1 L C eB eC e
COMMON DIMENSIONS (Unit of Measure = mm) MIN - 0.381 24.892 7.620 6.096 0.356 1.270 2.921 0.203 - 0.000 NOM - - - - - - - - - - - MAX 5.334 - 26.924 8.255 7.112 0.559 1.551 3.810 0.356 10.922 1.524 Note 2 Note 2 NOTE
2.540 TYP
1/23/04 2325 Orchard Parkway San Jose, CA 95131 TITLE 20P3, 20-lead (0.300"/7.62 mm Wide) Plastic Dual Inline Package (PDIP) DRAWING NO. 20P3 REV. D
R
11
20S - SOIC
Dimensions in Millimeters and (Inches). Controlling dimension: Inches. JEDEC Standard MS-013
0.51(0.020) 0.33(0.013)
7.60 (0.2992) 10.65 (0.419) 7.40 (0.2914) 10.00 (0.394) PIN 1 ID
PIN 1
1.27 (0.050) BSC
13.00 (0.5118) 12.60 (0.4961)
2.65 (0.1043) 2.35 (0.0926)
0.30(0.0118) 0.10 (0.0040)
0 ~ 8
0.32 (0.0125) 0.23 (0.0091)
1.27 (0.050) 0.40 (0.016)
10/23/03 2325 Orchard Parkway San Jose, CA 95131 TITLE 20S, 20-lead, 0.300" Body, Plastic Gull Wing Small Outline (SOIC) DRAWING NO. 20S REV. B
R
12
ATF16LV8C
ATF16LV8C
20X - TSSOP
Dimensions in Millimeters and (Inches). Controlling dimension: Millimeters. JEDEC Standard MO-153 AC
INDEX MARK
PIN 1
4.50 (0.177) 6.50 (0.256) 4.30 (0.169) 6.25 (0.246)
6.60 (.260) 6.40 (.252)
1.20 (0.047) MAX
0.65 (.0256) BSC 0.30 (0.012) 0.19 (0.007)
0.15 (0.006) 0.05 (0.002)
SEATING PLANE
0 ~ 8
0.20 (0.008) 0.09 (0.004)
0.75 (0.030) 0.45 (0.018)
10/23/03 2325 Orchard Parkway San Jose, CA 95131 TITLE 20X, (Formerly 20T), 20-lead, 4.4 mm Body Width, Plastic Thin Shrink Small Outline Package (TSSOP) DRAWING NO. 20X REV. C
R
13
Revision History
Revision Level - Revision Date H - June 2006 History Added Green package options.
14
ATF16LV8C
Atmel Corporation
2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600
Atmel Operations
Memory
2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314
RF/Automotive
Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany Tel: (49) 71-31-67-0 Fax: (49) 71-31-67-2340 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759
Regional Headquarters
Europe
Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500
Microcontrollers
2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 La Chantrerie BP 70602 44306 Nantes Cedex 3, France Tel: (33) 2-40-18-18-18 Fax: (33) 2-40-18-19-60
Biometrics/Imaging/Hi-Rel MPU/ High-Speed Converters/RF Datacom
Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France Tel: (33) 4-76-58-30-00 Fax: (33) 4-76-58-34-80
Asia
Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369
ASIC/ASSP/Smart Cards
Zone Industrielle 13106 Rousset Cedex, France Tel: (33) 4-42-53-60-00 Fax: (33) 4-42-53-60-01 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel: (44) 1355-803-000 Fax: (44) 1355-242-743
Japan
9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL'S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL'S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel's products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
(c) 2006 Atmel Corporation. All rights reserved. Atmel (R), logo and combinations thereof, Everywhere You Are (R) and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
0403H-06/06

▲Up To Search▲

Price & Availability of ATF16LV8C-10JU

	To Download ATF16LV8C-10JU Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .